Agilent Technologies InfiniiVision 3000 X-Series User Manual page 261

Waveform Characteristics
Type
Sine Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
and Offset/Low-Level softkeys to set the sine
signal parameters.
Square Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
Offset/Low-Level, and Duty Cycle softkeys to set
the square wave signal parameters.
The duty cycle can be adjusted from 20% to 80%.
Ramp Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
Offset/Low-Level, and Symmetry softkeys to set
the ramp signal parameters.
Symmetry represents the amount of time per cycle
that the ramp waveform is rising and can be
adjusted from 0% to 100%.
Pulse Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
Offset/Low-Level, and Width/Width Fine
softkeys to set the pulse signal parameters.
The pulse width can be adjusted from 20 ns to the
period minus 20 ns.
DC Use the Offset softkey to set the DC level.
Noise Use the Amplitude/High-Level and
Offset/Low-Level to set the noise signal
parameters.
Sine Cardinal Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude, and Offset
softkeys to set the sinc signal parameters.
Exponential Use the Frequency/Frequency
Rise Fine/Period/Period Fine, Amplitude/High-Level,
and Offset/Low-Level softkeys to set the
exponential rise signal parameters.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Waveform Generator
Frequency Max.
Range Amplitude
(High-Z)
100 mHz to 20 mVpp to
20 MHz 5 Vpp
100 mHz to 20 mVpp to
10 MHz 5 Vpp
100 mHz to 20 mVpp to
200 kHz 5 Vpp
100 mHz to 20 mVpp to
10 MHz. 5 Vpp
n/a n/a
n/a 20 mVpp to
5 Vpp
100 mHz to 20 mVpp to
1 MHz 5 Vpp
100 mHz to 20 mVpp to
5 MHz 5 Vpp
17
Offset
1
(High-Z)
1
±2.50 V
±2.50 V
±2.50 V
±2.50 V
±2.50 V
±2.50 V
±1.25 V
±2.50 V
261