Agilent Technologies InfiniiVision 3000 X-Series User Manual page 45

1.
2.
3.
4.
5.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Power cord Attach the power cord here.
connector
Kensington This is where you can attach a Kensington lock for securing the
lock hole instrument.
Module slot A DSOXLAN LAN/VGA module may be ordered and installed separately.
• LAN port — lets you communicate with the oscilloscope and use the
Remote Front Panel feature using the LAN port. See
"Web Interface," starting on page 315 and
Interface"
• VGA video output — lets you connect an external monitor or projector
to provide a larger display or to provide a display at a viewing position
away from the oscilloscope.
The oscilloscope's built-in display remains on even when an external
display is connected. The video output connector is always active.
For optimal video quality and performance, we recommend you use a
shielded video cable with ferrite cores.
A DSOXGPIB GPIB module may be ordered and installed separately.
TRIG OUT Trigger output BNC connector. See
connector Source"
Calibration See "To perform user calibration"
protect button
8. USB Device port
7. USB Host port
6. EXT TRIG IN
connector
5. Calibration
protect
button
4. TRIG OUT
connector
3. Module slot
2. Kensington lock hole
1. Power cord connector
on page 316.
on page 304.
on page 306.
Getting Started
3. LAN/VGA
option module
3. GPIB
option module
Chapter
"Accessing the Web
"Setting the Rear Panel TRIG OUT
1
21,
45