To Perform Front Panel Self Test; To Display Oscilloscope Information; To Display The User Calibration Status; To Clean The Oscilloscope - Agilent Technologies InfiniiVision 3000 X-Series User Manual

To perform front panel self test

Pressing [Utility] > Service > Front Panel Self Test lets you test the front panel
keys and knobs as well as the oscilloscope display.
Follow the on- screen instructions.

To display oscilloscope information

Press [Help] > About Oscilloscope to display information about your
oscilloscope:
• Model number.
• Serial number.
• Bandwidth.
• Module installed.
• Software version.
• Installed licenses. See also

To display the user calibration status

Pressing [Utility] > Service > User Cal Status displays the summary results of
the previous User Cal, and the status of probe calibrations for probes that
can be calibrated. Note that passive probes do not need to be calibrated,
but InfiniiMax probes can be calibrated. For more information about
calibrating probes see
Results:
User Cal date:
Change in temperature since last User Cal:
Failure:
Comments:
Probe Cal Status:

To clean the oscilloscope

1 Remove power from the instrument.
2 Clean the external surfaces of the oscilloscope with a soft cloth
3 Make sure that the instrument is completely dry before reconnecting it
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Information" on page 339.
dampened with a mixture of mild detergent and water.
to a power source.
"Loading Licenses and Displaying License
"To calibrate a probe"
Utility Settings
on page 70.
20
309