Creating New Arbitrary Waveforms - Agilent Technologies InfiniiVision 3000 X-Series User Manual

17
Waveform Generator
Softkey
Edit Existing
Interpolate
Source
Store Source to Arb
You can use the [Save/Recall] key and menu to save arbitrary waveforms to one of four
N O T E
internal storage locations or to a USB storage device, and you can recall them later. See
save arbitrary waveforms"

Creating New Arbitrary Waveforms

The New Waveform Menu is opened by pressing Create New in the Edit
Waveform Menu.
To create a new arbitrary waveform:
1 In the New Waveform Menu, press Initial Pts; then, use the Entry knob to
2 Use the Frequency/Frequency Fine/Period/Period Fine softkey to set the time
3 Use the Amplitude/High-Level and Offset/Low-Level softkeys to set the
264
Description
Opens the Edit Waveform Points Menu. See
page 265.
Specifies how lines are drawn between arbitrary waveform points.
When enabled, lines are drawn between points in the waveform editor. Voltage levels
change linearly between one point and the next.
When disabled, all line segments in the waveform editor are horizontal. The voltage level of
one point remains until the next point.
Selects the analog channel or reference waveform to be captured and stored to the arbitrary
waveform. See "Capturing Other Waveforms to the Arbitrary Waveform"
Captures the selected waveform source and copy it to the arbitrary waveform. See
"Capturing Other Waveforms to the Arbitrary Waveform"
select the initial number of points in the new waveform.
The new waveform will be a square wave with the number of points
you specify. The points are evenly spaced over the time period.
period bounding parameter (repetition frequency) of the arbitrary
waveform.
voltage bounding parameter of the arbitrary waveform.
"Editing Existing Arbitrary Waveforms"
on page 282 and "To recall arbitrary waveforms"
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
on page 266.
on page 266.
on page 285.
on
"To