Length Control - Agilent Technologies InfiniiVision 3000 X-Series User Manual

2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
4 Finally, press the Press to Save softkey.
See Also
•
•
•

Length Control

The Length control is available when saving data to CSV, ASCII XY, or BIN
format files. It sets the number of data points that will be output to the
file. Only displayed data points are saved.
The maximum number of data points depends on these things:
• Whether acquisitions are running. When stopped, data comes from the
• Whether the oscilloscope was stopped using [Stop] or [Single]. Running
• Whether only one channel of a pair is turned on. (Channels 1 and 2 are
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
navigate to the save location. See
page 282.
In the File Settings Menu, you have these softkeys and options:
Setup Info — when enabled, setup information (vertical, horizontal,
•
trigger, acquisition, math, and display settings) is also saved in a
separate file with a TXT extension.
Length — sets the number of data points that will be output to the
•
file. For more information, see
Save Seg — when data is acquired to segmented memory, you can
•
specify whether the currently displayed segment is saved or all
acquired segments are saved. (See also
Memory" on page 202.)
A message indicating whether the save was successful is displayed.
"Binary Data (.bin) Format"
"CSV and ASCII XY files"
"Minimum and Maximum Values in CSV Files"
raw acquisition record. When running, data comes from the smaller
measurement record.
acquisitions split memory to provide fast waveform update rates. Single
acquisitions use full memory.
one pair, channels 3 and 4 are the other.) Acquisition memory is
divided among the channels in a pair.
Save/Recall (Setups, Screens, Data)
"To navigate storage locations"
"Length Control"
"Saving Data from Segmented
on page 342
on page 348
on
on page 279.
on page 349
18
279