To save/load oscilloscope setups to/from a USB device
You can save/load setups to an external USB drive when it is connected to
the USB host port.
1 Press Save/Recall.
2 In the Save/Recall menu, press Storage until "USB" is selected.
3 Press File Type until "Setup" is selected.
4 Press Save or Load.
To save screens to BMP format files (on a USB device)
You can save oscilloscope display screens (in BMP format) to an external
USB drive when it is connected to the USB host port.
1 Press Save/Recall.
2 In the Save/Recall menu, press Storage until "USB" is selected.
3 Press File Type until "Bit map" is selected.
4 Press Bmp Format to select between 24- bit and 8- bit.
5 Press Save.
Agilent 3000 Series Oscilloscopes User's Guide
For information on using the Save menu, see
device"
on page 106.
For information on using the Load menu, see
USB device"
on page 108.
For information on using the Save menu, see
device"
on page 106.
For information on using the Load menu, see
USB device"
on page 108.
For information on using the Save menu, see
device"
on page 106.
Saving, Recalling, and Printing Data
"To save a file to a USB
"To load a file from a
"To save a file to a USB
"To load a file from a
"To save a file to a USB
5
105