To Save Reference Waveform Files To A Usb Storage Device; To Save Masks - Agilent Technologies InfiniiVision 4000 X-Series User Manual

18
Save/Email/Recall (Setups, Screens, Data)

To save reference waveform files to a USB storage device

1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press the Save softkey.
3 In the Save Menu, press the Format softkey and turn the Entry knob to
4 Press the Source softkey and turn the Entry knob to select the source
5 Press the softkey in the second position and use the Entry knob to
6 Finally, press the Press to Save softkey.

To save masks

Mask files can be saved to one of four internal (\Agilent Flash) locations
or to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
Mask files have the extension MSK.
Masks are also saved as part of setup files. See
N O T E
See Also
•
314
A message indicating whether the save was successful is displayed.
select Reference Waveform data (*.h5) .
waveform.
navigate to the save location. See
page 315.
A message indicating whether the save was successful is displayed.
Mask (*.msk).
navigate to the save location. See
page 315.
A message indicating whether the save was successful is displayed.
Chapter 15, "Mask Testing," starting on page 269
"To navigate storage locations"
"To navigate storage locations"
"To save setup files"
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on
on
on page 309.