Epld Images Needed For Lisp - Cisco Nexus 7000 Hardware Installation And Reference Manual

7000 series
Hide thumbs Also See for Nexus 7000:
Table of Contents

Advertisement

Appendix 8
Managing the Switch Hardware
The following example shows Release 186.008 on the FE Bridge line, which is the correct EPLD
version:
Nexus-7k(config)# show version module 7 epld
EPLD Device
-----------------------------------------
Power Manager
IO
Forwarding Engine
FE Bridge(1)
FE Bridge(2)
Linksec Engine(1)
Linksec Engine(2)
Linksec Engine(3)
Linksec Engine(4)
Linksec Engine(5)
Linksec Engine(6)
Linksec Engine(7)
Linksec Engine(8)

EPLD Images Needed for LISP

The Locator/ID Separator Protocol ( LISP) feature is available beginning with Cisco NX-OS Release
5.2(1). When you enable LISP on the chassis, you must have EPLD image 186.8 or 186.008 (or later
image) on the 32-port 10-Gigabit Ethernet types of I/O modules (N7K-M132XP-12 and
N7K-M132XP-12L).
The EPLD upgrade operation is a disruptive operation. You should execute this operation only at a
Note
programmed maintenance time. The system/kickstart ISSU upgrade is a nondisruptive upgrade.
If you are working with an N7K-M132XP-12 module that was shipped before July 2011, you might need
to upgrade the EPLD version.
To determine the EPLD version for all N7K-M132XP-12 and N7K-M132XP-12L modules, enter the
show version module slot_number epld. If the line FE Bridge(x) version displays a version earlier than
186.8 or 186.008, you should schedule an EPLD upgrade to a version that is compatible with the target
Cisco NX-OS release. For example, if you want to run Cisco NX-OS Release 5.2(1), you should choose
Release 5.2(1) EPLDs.
The following example shows Release 186.008 on the FE Bridge line, which is the correct EPLD
version:
Nexus-7k(config)# show version module 7 epld
EPLD Device
-----------------------------------------
Power Manager
IO
Forwarding Engine
FE Bridge(1)
FE Bridge(2)
Linksec Engine(1)
Linksec Engine(2)
Linksec Engine(3)
Linksec Engine(4)
Linksec Engine(5)
OL-23069-06
Version
4.008
1.016
1.006
186.008 << OK!
186.008 << OK!
2.007
2.007
2.007
2.007
2.007
2.007
2.007
2.007
Version
4.008
1.016
1.006
186.008 << OK!
186.008 << OK!
2.007
2.007
2.007
2.007
2.007
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Configuring EPLDs
8-43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexus 7004Nexus 7009Nexus 7010Nexus 7018

Table of Contents