Cisco Nexus 7000 Hardware Installation And Reference Manual page 456

Repacking the System Components
Figure E-11
1 Four M4 pan-head screws that attach the top frame to
each side frame (two screws for each side frame)
b. Remove one of the side cable managment frames by unscrewing its six M4 screws, and lifting the
frame up and away from the chassis. Place the screws in a bag for small accessory kit parts (see
Figure
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
E-18
Removing the Top Cable Management Frame
E-12).
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
OL-23069-07