Cisco Nexus 7000 Hardware Installation And Reference Manual page 443

Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
Tape the larger flaps together and to the box (see Callout 12 in
m.
If there is an air filter attached to the chassis, remove and repack it as follows:
Step 5
Open the air filter box, place a layer of padding in the bottom of the box, and place the four-sided
a.
padding in the box (see Callouts 4, 5, and 6 in
Figure E-2
1
1
Cardboard trifold protector for air filter
2 Air filter centered on trifold
3 Two flaps folded over the air filter
4 Air filter box opened
5
Padding placed in the bottom of the air filter
box
Unscrew the eight M3 screws that fasten the air filter to the right side of the chassis.
b.
Remove the air filter from the chassis and center it on the trifold piece of cardboard found with the
c.
packing materials (see Callouts 1 and 2 in
Fold the two trifold flaps over the air filter (see Callout 3 in
d.
Place the protected air filter inside the four-sided padding in the air filter box (see Callout 7 in
e.
Figure
Place a layer of padding over the air filter in the air filter box (see Callout 8 in
f.
OL-23069-07
Packing the Air Filter for the Cisco Nexus 7004 Chassis
3
2
3
9
E-2).
Figure E-2).
7
4
6
Four-sided padding
7 Air filter in trifold placedinside the four-sided
padding in the air filter box
8 Padding placed on top of air filter
9 Air filter box top folded over to close the box
10 Two flaps on air filter box inserted into slots
in the box walls.
Figure E-2).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Repacking the System Components
Figure E-1).
8
6
5
10
Figure E-2).
Figure
10
E-2).
E-5