Cisco Nexus 7000 Hardware Installation And Reference Manual page 119

Chapter 4 Installing a Cisco Nexus 7010 Chassis
Figure 4-14
1 Unscrew four captive screws until they are
each clear of the chassis.
On each side of the EMI panel, align a side frame piece so that its two screw holes align to two screw
b.
holes on one side of the EMI panel. Screw in a screw in each of these two screw holes so that the
side frame assembly is attached to the EMI panel. Repeat this step for the other side of the EMI
panel. See
OL-23069-07
Removing the EMI Panel
Figure 4-15.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Front Doors and Frame Assembly
2 Remove the EMI panel from the chassis.
4-21