Displaying The Status Of Epld Upgrades; Default Settings - Cisco Nexus 7000 Hardware Installation And Reference Manual

Default Settings

1000 Mbps Optical Ethernet Module
1000 Mbps Optical Ethernet Module
1000 Mbps Optical Ethernet Module
1000 Mbps Optical Ethernet Module
...
Fabric Module 2
Fabric Module 2
...
Fan<Cisco Nexus 7009>
Fan<Cisco Nexus 7009>

Displaying the Status of EPLD Upgrades

To display the status of EPLD upgrades on the switch, use the show install epld status command as
shown in
Example 8-19 Displaying EPLD Upgrades
switch# show install epld status
1) Xbar Module 4 upgraded on Wed Oct 26 16:36:27 2011 (524778 us)
Status: EPLD Upgrade was Successful
EPLD
------------------------------------------------------
Power Manager
2) Module 14 upgraded on Mon May 23 19:45:55 2011 (835895 us)
Status: EPLD Upgrade was Successful
...
Default Settings
Table 8-14
Table 8-14
Parameters
Power supply mode
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
8-52
Example 8-19.
lists the default hardware settings.
Default Hardware Parameters
Default
Power supply redundancy mode
Appendix 8
Power Manager
IO
Forwarding Engine
SFP
Power Manager
Power Manager
Fan Controller
Fan Controller
Curr Ver Old Ver
1.003 1.003
Managing the Switch Hardware
4.008
1.006
1.006
1.004
1.003
1.003
0.009
0.009
OL-23069-06