Cisco Nexus 7000 Hardware Installation And Reference Manual page 333

Chapter 10 Installing or Replacing Components
Figure 10-29
1 Lower cable management assembly.
2 Left rack-mount bracket.
Repeat Step 5 for the lower cable management assembly on the right side.
Step 6
Step 7 Pack the two lower cable management assemblies, two upper cable management assemblies, the top
cover, and their screws in their original packing materials.
OL-23069-07
Replacing the Cable Management Frame on the Cisco Nexus 7018 Chassis
Removing a Lower Cable Management Assembly
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
3 Loosen and remove four M4x10 screws.
4 Lift the lower cable management assembly off
the rack-mount bracket hooks.
10-75