Cisco Nexus 7000 Hardware Installation And Reference Manual page 345

Chapter 10 Installing or Replacing Components
Figure 10-40 Removing the Air Intake Assembly
1
p.
q.
r.
OL-23069-07
Loosen two captive screws until they are clear
of the chassis.
Pull the air intake assembly off the chassis.
Loosen and remove the four ball-point studs shown in
Repack the air intake frame and ball-point studs in their original packing materials.
Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
2 Remove the air intake assembly from the
chassis.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Figure 10-41.
10-87