Cisco Nexus 7000 Hardware Installation And Reference Manual page 352

Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
Figure 10-46
1 Four M4x8 pan-head screws that fasten the
bottom hinge bracket to the chassis.
Tighten the four M4x8 screws that fasten the bottom hinge bracket to the chassis to 11 to 15 in-lb (1.2
Step 7
to 1.7 N·m).
Tighten the four M4x8 screws that fasten the bottom hinge bracket to the cable management frame to 11
Step 8
to 15 in-lb (1.2 to 1.7 N·m).
Fasten the four ball-point studs to the bottom portion of the chassis, one stud by each corner of the air
Step 9
intake area as shown in
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-94
Attaching the Hinge Bracket to the Cable Management Frame and Chassis
Figure 10-47.
Chapter 10 Installing or Replacing Components
2 Four M4x8 pan-head screws that fasten the
bottom hinge bracket to the left and right sides
of the cable management frame.
OL-23069-07