Cisco Nexus 7000 Hardware Installation And Reference Manual page 454

Repacking the System Components
Figure E-9
1 Door stop for the left cable managment frame 2
j. Remove the air-intake frame by unscrewing its two captive screws (one screw on each side) and
pulling the frame off the chassis.
k. Open the box for the front door and air-intake frame kit (see Callout 1 in
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
E-16
Appendix E
Removing the Door Stop from the Left Cable Management Frame
Repacking the Cisco Nexus 7000 Series Switch for Shipment
Two M3 screws that hold the door stop to the
cable management frame.
Figure E-10).
OL-23069-07