Cisco Nexus 7000 Hardware Installation And Reference Manual page 243

Appendix 8 Managing the Switch Hardware
To prepare the EPLD images for installation, follow these steps:
Log in to the switch through the console port, an SSH session, or a Telnet session.
Step 1
Verify that the switch is using the expected version of the Cisco NX-OS operating system. The kickstart
Step 2
and system lines indicate the Cisco NX-OS version. This step determines the versions of EPLD images
that you must download.
switch# show version
..Software
BIOS:
kickstart: version 6.2(2)
system:
BIOS compile time:
kickstart image file is: bootflash:/n7000-s2-kickstart.6.2.2.bin
kickstart compile time:
system image file is:
system compile time:
Step 3 Verify that you have 120 MB of free space on the active or standby supervisor memory devices for the
EPLD images that you will be downloading by using the dir bootflash: or dir slot0: commands.
By default, these commands display the used and free memory for the active supervisor. If your switch
has an additional supervisor (a standby supervisor), use the show module command to find the module
number for the other supervisor, use the attach module command to attach to the module number, and
then use the dir bootflash: or dir slot0: command to determine the amount of used and free memory.
See Example 8-13
determine the amount of available slot0 memory.
Example 8-13 Determining the Amount of Available Bootflash Memory
switch# dir bootflash:
...
3020665
207429135
207558132
29479424
29467136
...
Usage for bootflash://sup-local
978673664 bytes used
860184576 bytes free
1838858240 bytes total
switch# show module
Mod
---
6
7
8
9
10
...
switch# attach module 9
Attaching to module 9 ...
To exit type 'exit', to abort type '$.'
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
OL-23069-06
version 3.22.0
version 6.2(2)
02/20/10
6/12/2013 12:00:00 [06/18/2013 18:37:07]
bootflash:/n7000-s2-dk9.6.2.2.bin
6/12/2013 13:00:00 [06/18/2013 19:21:22]
to determine the amount of available bootflash memory, and see
4096 Dec 11 01:19:53 2012 lost+found/
Oct 08 07:47:36 2012
Oct 08 07:35:03 2012
Dec 11 07:11:31 2012
Oct 08 12:03:47 2012
Dec 11 10:35:18 2012
Ports Module-Type
----- -------------------------------- ------------------ ------------
8 10 Gbps Ethernet XL Module
48 1/10 Gbps Ethernet Modul
48 1000 Mbps Optical Ethernet XL Mo N7K-M148GS-11L
0 Supervisor module-1X
0 Supervisor module-1X
n7000-s1-debug-sh-bash.6.1.4.gbin
n7000-s1-dk9.6.1.4.gbin
n7000-s2-dk9.6.2.2.gbin
n7000-s2-kickstart.6.1.4.gbin
n7000-s2-kickstart.6.2.2.gbin
Model
N7K-M108X2-12L
N7K-F248XP-24
N7K-SUP1
N7K-SUP1
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Configuring EPLDs
Example 8-14 to
Status
ok
ok
ok
ha-standby
active *
8-45