Cisco Nexus 7000 Hardware Installation And Reference Manual page 351

Chapter 10 Installing or Replacing Components
Figure 10-45
1 Alignment pins
Attach the bottom hinge bracket to the chassis with eight loosely fastened M4x8 screws (see Callout 1
Step 5
in Figure
Attach the bottom hinge bracket to the bottom of both sides of the cable management frame (see Callout
Step 6
2 in Figure
OL-23069-07
Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
Positioning the Hinge Bracket to the Cable Management Frame and Chassis
10-46).
10-46).
2 Alignment holes
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-93