Disconnecting The System From The Network; Repacking The System Components; Prerequisites For Repacking The System; Required Tools And Equipment For Repacking The System - Cisco Nexus 7000 Hardware Installation And Reference Manual

7000 series
Hide thumbs Also See for Nexus 7000:
Table of Contents

Advertisement

Repacking the System Components

Disconnecting the System from the Network

To disconnect the system from the network, you must remove each I/O cable from the system I/O
modules.
Repacking the System Components
You repack the Cisco Nexus 7000 Series system in its shipping materials, which you can order if they
are not available at your facility. To make the Cisco Nexus 7000 Series lighter and easier to move,
remove its power supply units, its external frames and doors, and, for the Cisco Nexus 7010 switch, its
optional air filter before you move the chassis. You should pack each of these components separately. To
pack the chassis, you typically use a mechanical lift (required whenever lifting over 120 pounds [54.4
kg]) to move the chassis from the rack to its shipping pallet, where you can package the chassis and its
components.
This section includes the following topics:

Prerequisites for Repacking the System

You must power down and disconnect the system from the network before you begin removing the switch
from the rack or cabinet (see the
page

Required Tools and Equipment for Repacking the System

Before you repack the Cisco Nexus 7000 Series chassis into its original shipping materials, make sure
that you have the following tools and equipment:
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
E-2
Prerequisites for Repacking the System, page E-2
Required Tools and Equipment for Repacking the System, page E-2
Repacking the Cisco Nexus 7004 Switch, page E-3
Repacking the Cisco Nexus 7009 Switch, page E-8
Repacking the Cisco Nexus 7010 Switch, page E-22
Repacking the Cisco Nexus 7018 Switch, page E-30
E-1).
Mechanical lift capable of lifting one of the following weights:
Cisco Nexus 7004 chassis—50 lbs (68 kg)
Cisco Nexus 7009 chassis—300 lbs (136 kg)
Cisco Nexus 7010 chassis—550 lbs (250 kg)
Cisco Nexus 7018 chassis—700 lbs (318 kg)
Number 1 Phillips screwdriver with torque capability
Nut driver attachment for screwdriver or ratchet wrench with torque capability (used only for DC
power supplies)
3/16-inch flat-blade screwdriver
ESD wrist strap
Appendix E
Repacking the Cisco Nexus 7000 Series Switch for Shipment
"Disconnecting the Cisco Nexus 7000 Series System" section on
OL-23069-07

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexus 7004Nexus 7009Nexus 7010Nexus 7018

Table of Contents