Cisco Nexus 7000 Hardware Installation And Reference Manual page 346

Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
Figure 10-41
1 Ball-point stud
s. Repack the air intake frame and ball-point studs in their original packing box, then fold over the box
flaps and tape them shut.
Open the box for the front door and air intake frame kit and insert the components as shown in
t.
Figure
Close the box flaps and tape them shut.
u.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-88
Removing the Four Ball-Headed Studs
10-42.
Chapter 10 Installing or Replacing Components
OL-23069-07