Vxlan Encapsulation For Layer-3 Lisp Configuration - Cisco Nexus 7000 Series Configuration Manual

VXLAN Encapsulation for Layer-3 LISP Configuration

VXLAN Encapsulation for Layer-3 LISP Configuration
This section summarizes only the steps that are used for configuring LISP for a hand-off from VXLAN on
the border spine or border leaf switch.
Figure 23: Overall Topology of Campus Fabric
feature-set fabric
hostname PxTR1
feature telnet
feature bgp
feature pim
feature isis
feature lisp
feature interface-vlan
system bridge-domain 100
feature nv overlay
feature vni
vni 5000
vlan 1
bridge-domain 100
route-map LISP-RMAP permit 10
bridge-domain 100
/* UNDERLAY VRF*/
vrf context core
description "UNDERLAY VRF"
ipv6 lisp itr-etr
ip lisp itr-etr
ipv6 lisp itr map-resolver 9.9.9.9
ip lisp itr map-resolver 9.9.9.9
ip lisp etr map-server 9.9.9.9 key 3 a97b0defe7b8ff70
ip lisp multicast
lisp encapsulation vxlan
/*
vrf context vrf5000
Cisco Nexus 7000 Series NX-OS VXLAN Configuration Guide
84
OVERLAY VRF */
Campus Fabric