Configuring Cisco Controller Settings
The Groups > Cisco WLC Config > Controller page defines general Cisco WLC settings, Cisco mobility
groups to be supported on Cisco controllers, Network Transfer Protocol (NTP), and Spanning Tree Protocol
settings.
Navigate to the Groups > Cisco WLC Config > Controller page. This navigation is illustrated in
Figure 57 Groups > Cisco WLC Config > Controller Navigation
Configuring Wireless Parameters for Cisco Controllers
This section illustrates the configuration of Wireless settings in support of Cisco WLC controllers. The navigation
for Wireless settings is illustrated in
Figure 58 Groups > Cisco WLC Config > Wireless Navigation Illustration
Configuring Security Parameters and Functions
AWMS enables you to configure many security settings that are specific to Cisco WLC controllers. This section
supports four overriding types of configuration, as follows:
AAA, to cover both RADIUS and TACACS+ server configuration
Priority Order
Wireless Protection Policies
Web Auth
Figure 59
110
| Configuring and Using Device Groups in AWMS
Figure
illustrates these components and this navigation:
58.
Dell PowerConnect W AirWave 7.1 | User Guide
Figure
57.