Dell PowerConnect W-Airwave User Manual page 230

Table 120 Users > Connected Fields and Default Values
Field
Username
Role
MAC Address
AP/Device
Group
SSID
VLAN
AP Radio
Connection
Mode
Ch BW
User Radio Mode Displays the Radio mode used by the user to associate to the AP. It will display 802.11a/b/g/bg. 802.11bg is
Association Time Displays the first time AWMS recorded the MAC address as being associated.
Duration
Auth. Type
Cipher
Auth. Time
Signal Quality
BW
Location
LAN IP
LAN Hostname
230 | Performing Daily Administration in AWMS
Description
Displays the name of the User associated to the AP. AWMS gathers this data in a variety of ways. It can be
taken from RADIUS accounting data, traps from Cisco VxWorks APs and tables on Colubris APs. Usernames
appear in italics when a username for that MAC address has been stored in the database from a previous
association, but AWMS is not getting a username for the current association. This may indicate that the user
has not yet been authenticated for this session (as indicated if you mouse over the username) or AWMS may
not be getting a username from an external source like a RADIUS server for this association.
Specifies the role by which the user is connected.
Displays the radio MAC address of the user associated to the AP. Also displays a link that redirects to the
Users > Detail page.
Displays the name of the AP to which the MAC address is associated Also displays a link that takes you to
this AP's Monitoring page.
Displays the group containing the AP that the user is associated with.
Displays the SSID with which the user is associated.
Displays the VLAN assigned to the user.
Displays the radio type of the radio that the user is associated with.
Displays the 802.11 mode by which the user is connected.
Displays the channel bandwidth that currently supports the user.
reported when the AP does not provide AWMS with enough information to determine the exact radio type.
Displays the length of time the MAC address has been associated.
Displays the type of authentication employed by the user: EAP, PPTP, RADIUS accounting, or not
authenticated.
EAP is only reported by Cisco VxWorks via SNMP traps.

PPTP is supported by Colubris APs acting as VPNs.

RADIUS accounting servers integrated with AWMS will provide the RADIUS Accounting Auth type.

All others are considered to be not authenticated.

Displays WEP with keys. Cipher options are as follows:
WEP with 802.11x

WPA PSK (TKIP)

WPA with 802.11x

WPA2 PSK (AES)

WPA2 with 802.11x (AES)

This data is also displayed in the User Session report.
Displays the how long ago the user authenticated.
Displays the average signal quality the user enjoyed.
Displays the average bandwidth consumed by the MAC address.
Displays the QuickView box allows users to view features including heatmap for a device and location history
for a user.
Displays the IP assigned to the user MAC. This information is not always available. AWMS can gather it from
the association table of Colubris APs or from the ARP cache of switches set up in AWMS.
Displays the LAN hostname of the user MAC.
Dell PowerConnect W AirWave 7.1 | User Guide