Understanding The Aps/Devices > Interfaces Page - Dell PowerConnect W-Airwave User Manual

Figure 100 APs/Devices > Interfaces Page for Wired Devices (partial view)
.
The Interfaces page includes a summary of all the interfaces at the top. In case of the stacked switches, the
master includes the interfaces of all the members including its own. The physical and the virtual interfaces are
displayed in separate tables, labelled Physical and Virtual.
AWMS now monitors Up/Down status and bandwidth information on all interfaces. You can edit multiple
interfaces concurrently by clicking one of the two Edit Interfaces hyperlinks as shown using red arrows in Figure
100 above. You can edit both monitoring and configuration settings this way.
Interface labels are used to group one or more interfaces for the purpose of defining interface bandwidth triggers.
For more information on interface bandwidth triggers, see ""Monitoring and Supporting AWMS with the System
Pages" on page 249" on page 213.
Understanding the APs/Devices > Interfaces Page
"Monitoring Data Specific to Wired Devices (Routers and Switches)" on page 153 shows you how to view high
level interface information for all physical and virtual interfaces on an entire router or switch. Click any interface
hotlink in the Name column of the Physical or Virtual Interfaces tables on the stacked switches Interfaces
monitoring page to navigate to an Interfaces page displaying data relevant to that specific interface, as shown
Figure 101.
154 | Discovering, Adding, and Managing Devices Dell PowerConnect W AirWave 7.1 | User Guide