Dell PowerConnect W-Airwave User Manual page 259

To restore the Watched AWMS run the backup script from the command line and copy the current data file
and the old Watched AWMS configuration file to the Watched AWMS. Then run the restore script. More
information about backups and restores can be found in
Table 132 Home > Watched Page Fields and Default Values
Setting
IP/Hostname
Username
Password
HTTP Timeout
(5-1000 Sec)
Polling Enabled
Polling Period
Missed Poll
Threshold
Dell PowerConnect W AirWave 7.1 | User Guide
Default Description
None The IP address or Hostname of the watched AWMS.
The Failover AWMS needs HTTPS access to the watched AMPs.
None A username with management rights on the watched AWMS.
None The password for the username with management rights specified above.
60 The amount of time before AWMS considers a polling attempt failed.
Yes Enables or disables polling of the Watched AWMS.
NOTE: You do not need to disable polling of the watched AWMS system if it is set to be down
during nightly maintenance or is being upgraded.
5 minutes The amount of time between polls of the Watched AWMS.
None The number of polls that can be missed before the failover AWMS will begin actively
monitoring the Watched AWMS APs.
"Backing Up AWMS" on page
Performing Daily Administration in AWMS |
256.
259