Modifying Multiple Devices - Dell PowerConnect W-Airwave User Manual

Schedule—This button schedules the changes to be applied to this group in the future. Enter the desired

change date in the Start Date/Time field. AWMS takes the time zone into account for the group if a time
zone other than AWMS System Time has been configured on the Group > Basic configuration page.
Cancel—This button cancels the application of changes (immediately or scheduled).

Note: To completely nullify the change request, click Revert on one of the group configuration pages after you have clicked
Cancel.
7. Apply changes to multiple groups by selecting the appropriate group or groups and clicking Preview.

Modifying Multiple Devices

AWMS provides a very powerful utility that modifies all APs or a subset of access points unrelated to the typical
AWMS group construct. This utility provides the ability to delete simultaneously multiple devices, migrate
multiple devices to another group and/or folder, update credentials and optimize channels. Perform these steps to
modify multiple devices.
1. To modify multiple devices, navigate to one of the following pages:
APs/Devices > List

APs/Devices > Up

APs/Devices > Down

APs/Devices > Mismatched

Groups > Monitor configuration pages

Each of these pages displays a list of devices
2. Click Modify Devices to make the checkboxes at the left of all devices appear. In addition, a new section
appears in this page location to display various settings that can be configured for multiple devices at one
time.
122 | Configuring and Using Device Groups in AWMS
Figure 70 illustrates this page.
Dell PowerConnect W AirWave 7.1 | User Guide