Configuring Radio Settings For Device Groups - Dell PowerConnect W-Airwave User Manual

Configuring Radio Settings for Device Groups

The Groups > Radio configuration page allows you to specify detailed RF-related settings for devices in a
particular group.
Note: If you have existing deployed devices, you may want to use the current RF settings on those devices as a guide for
configuring the settings in your default Group.
Perform the following steps to define RF-related radio settings for groups.
1. Navigate to the Groups > List page and select the group for which to define radio settings by clicking the
group name. Alternatively, click Add from the Groups > List page to create a new group, define a group
name. In either case, the Monitor page appears.
2. Navigate to the Groups > Radio page.
Figure 48 Groups > Radio Page Illustration
100 | Configuring and Using Device Groups in AWMS
Figure 48 illustrates this page.
Dell PowerConnect W AirWave 7.1 | User Guide