Dell PowerConnect W-Airwave User Manual page 171

Figure 119 APs/Devices > Manage Firmware Upgrades
Table 91 APs/Devices > Manage Firmware Upgrades Fields and Default Values
Setting
Desired Version
Job Name
Use "/safe" flag for
Cisco IOS firmware
upgrade command
Email Recipients
Sender Address
Dell PowerConnect W AirWave 7.1 | User Guide
Default Description
None Drop-down menu that specifies the firmware to be used in the upgrade. Firmware can be
added to this drop-down menu on the Device Setup > Firmware Files page.
None Sets a user-defined name for the upgrade job. Aruba recommends using a meaningful
and descriptive name.
No Enables or disables the /safe flag when upgrading IOS APs. The /safe flag must be
disabled on older APs for the firmware file to fit in flash memory.
None Displays a list of email addresses that should receive alert emails if a firmware upgrade
fails.
None Displays the From address in the alert email.
Discovering, Adding, and Managing Devices | 171