Dell PowerConnect W-Airwave User Manual page 97

W-airwave 7.1 user guide
Hide thumbs Also See for PowerConnect W-Airwave:
Table of Contents

Advertisement

Table 57 Groups > SSIDs > EAP Options Section Fields and Default Values
Setting
WEP Key Rotation
Interval (seconds)
Cisco TKIP
Cisco MIC
7. Locate the RADIUS Authentication Servers area on the Groups > SSIDS configuration page and define the
settings.
Table 58 Groups > SSIDs > RADIUS Authentication Servers Fields and Default Values
Setting
RADIUS
Authentication Server
1-3
(Colubris,
ProCurve420, Proxim
only)
Authentication Profile
Name (Proxim Only)
Authentication Profile
Index (Proxim Only)
8. Click Save when the security settings and configurations in this procedure are complete.
Note: You may need to return to the Security configuration page to configure or reconfigure RADIUS servers.
9. Locate the RADIUS Accounting Servers area on the Groups > SSIDS configuration page and define the
settings.
Table 59 Groups > SSIDs > Radius Accounting Servers Fields and Default Values
Setting
RADIUS Accounting Server
1-3 (Proxim Only)
Accounting Profile Name
(Proxim Only)
Accounting Profile Index
(Proxim Only)
Dell PowerConnect W AirWave 7.1 | User Guide
Default
Description
120
Time (in seconds) between WEP key rotation on the AP.
No
If enabled, Cisco Temporal Key Integrity Protocol (TKIP) provides per-packet key
mixing, a message integrity check and a re-keying mechanism, thus fixing the flaws of
WEP.
NOTE: TKIP can only be enabled when EAP-based security is used.
Disabled
If enabled, Cisco Message Integrity Check (MIC) adds several bytes per packet to
make it more difficult to tamper with the packets.
Table 58
describes the settings and default values.
Default
None
None
None
Table 59
describes the settings and default values.
Default
None
None
None
Description
Drop-down menu to select RADIUS Authentication servers previously entered on
the Group > RADIUS configuration page. These RADIUS servers dictate how
wireless clients authenticate onto the network.
Sets the Authentication Profile Name for Proxim AP-600, AP-700, AP-2000, AP-4000,
Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Sets the Authentication Profile Index for Proxim AP-600, AP-700, AP-2000, AP-4000,
Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Description
Pull-down menu selects RADIUS Accounting servers previously entered on
the Group > RADIUS configuration page. These RADIUS servers dictate where
the AP sends RADIUS Accounting packets for this SSID/VLAN.
Sets the Accounting Profile Name for Proxim AP-600, AP-700, AP-2000, AP-
4000, Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Sets the Accounting Profile Index for Proxim AP-600, AP-700, AP-2000, AP-
4000, Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Configuring and Using Device Groups in AWMS |
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w airwave 7.1

Table of Contents