Dell PowerConnect W-Airwave User Manual page 57

Table 25 Cisco Aironet VxWorks User Creation Options Fields and Default Values
Setting
Do Not Modify
Security/SNMP
Settings
Create and Use
Specified User
9. On the Device Setup > Communication page, locate the Symbol 4131/Intel 2011b and Cisco Aironet IOS
SNMP Initialization area. You only need to provide this information if you use Symbol 4131, Intel 2011b, or
Cisco Aironet IOS access points. Select one of the options listed.
values.
Table 26 Device Setup > Communications Fields and Default Values
Setting
Do Not Modify SNMP Settings Yes
Enable Read-Write SNMP
Dell PowerConnect W AirWave 7.1 | User Guide
Default Description
N/A Enables AWMS using only an existing user account on the AP, as defined in the Cisco
VxWorks Username/Password section in the Default Secrets area. This user account must
have all permissions set.
N/A Enables AWMS to create a new user account, specified below, on each AP, with all
permissions enabled.
Default
No
Table 26
Description
When selected, specifies that AWMS not modify any SNMP settings. If
SNMP is not already initialized on the Symbol, Intel, and Cisco IOS APs,
AWMS is not able to manage them.
When selected, and when on networks where the Symbol, Intel, and Cisco
IOS APs do not have SNMP initialized, this setting enables SNMP so the
devices can be managed by AWMS.
describes the settings and default
Configuring AWMS | 57