Dell PowerConnect W-Airwave User Manual page 170

Figure 118 APs/Devices > Manage > Device Communication
Note: The Device Communication area may appear slightly different depending on the particular vendor and model of the APs
being used.
3. Enter the appropriate Auth Password and Privacy Password.
4. You can disable the View AP Credentials link in AWMS by the root user. Contact Dell support for detailed
instructions to disable the link.
5. (Optional-Not pictured.) Enter the appropriate SSH and Telnet credentials if you are configuring Dell, Aruba
Networks, Alcatel-Lucent or any Cisco device except Cisco wireless LAN controllers.
6. Click Apply. AWMS presents a confirmation window reminding you of all configuration changes that will be
applied to the AP. Click Confirm Edit to apply the changes to the AP immediately, Schedule to schedule the
changes to occur during a specific maintenance window, or Cancel to return to the APs/Devices > Manage
page.
Note: Some AP configuration changes may require the AP to be rebooted. Use the Schedule function to schedule these changes
to occur at a time when WLAN users will not be affected.
Click Upgrade Firmware to upgrade the device's firmware.
the settings and default values.
170 | Discovering, Adding, and Managing Devices
Figure 119 illustrates this page and
Dell PowerConnect W AirWave 7.1 | User Guide
Table 91 describes