Configuring Policy Manager; Installing Policy Manager; Server Port Overview; Server Port Configuration - Dell Powerconnect W-ClearPass Hardware Appliances Quick Start Manual

This Quick Start Guide for the Dell Networking W-ClearPass Policy Manager System (Policy Manager) describes the
steps for installing the appliance using the Command Line Interface (CLI) and using the User Interface (UI) to ensure
that the required services are running.

Installing Policy Manager

The Policy Manager server requires initial port configuration.

Server Port Overview

Policy Manager Backplane
P—Power Button; A—Serial port; B—Management port; C—Data port
as described in the following table:
Key
A
B - eth1
C - eth2

Server Port Configuration

Before starting the installation, gather the following required information:
Dell Networking W-ClearPass Policy Manager 6.0 | Quick Start Guide
Port
Serial
Management (gigabit
Ethernet)
Data (gigabit Ethernet)
Chapter 1

Configuring Policy Manager

Description
Configures the Policy Manager
appliance initially, via hardwired
terminal.
Provides access for cluster
administration and appliance
maintenance via web access, CLI, or
internal cluster communications.
Configuration required.
Provides point of contact for RADIUS,
TACACS+, Web Authentication and
other data-plane requests.
Configuration optional. If not
configured, requests redirected to the
management port.
5