Dell PowerConnect W-Airwave User Manual page 232

Figure 160 Users > Guest Users Page Illustration
Table 121 Users > Guest Users Fields
Field
Repair Guest User
Errors button
Add New Guest Users
button
Username
Enabled
Email
Company Name
Sponsor Name
Expiration
Profile/SSID
Status
Print button (for
checked users)
Delete button (for
checked users)
Guest users associated to the wireless network appear on the same list as other wireless users, but are
identified as guest users in the SSID column, when this column is present for Cisco WLC. The User Detail
page for a guest user also contains a box with the same guest information that appears for each user on the
Users > Guest Users list.
5. To add a new guest user, click Add, and complete the required and optional fields in the User Detail page,
illustrated in
remaining fields are optional.
232 | Performing Daily Administration in AWMS
Description
Sets AWMS to attempt to push the guest user again in an attempt to repair any errors in the Status
column.
Adds a new guest user to a controller via AWMS.
Randomly generates a user name for privacy protection. This name appears on the Guest User detail
page.
Enables or disables the user status. Set the status of the guest user as active (enabled) or expired
(disabled). Configure the user on the Guest User edit page by clicking the pencil icon.
Displays the optional email address of the user. Set the email address with the Guest User edit page by
clicking the pencil icon.
Displays the optional company name for the user. Set the company name with the Guest User edit page
by clicking the pencil icon.
Displays the name of the sponsor for the guest user. This setting is optional. Set the sponsor with the
Guest User edit page by clicking the pencil icon.
Displays the date the guest user's access is to expire. Set the expiration with the Guest User edit page
by clicking the pencil icon.
Sets the SSID that the guest user can access. This setting applies to Cisco WLC only. Set the SSID with
the Guest User edit page by clicking the pencil icon.
Reports current status by the controller. If error messages appear in this column, select the user with
the checkbox at left, and click the Repair guest user errors button.
Sends the selected guest user's information to an external printer.
Removes the selected guest user from AWMS and from the controller.
Figure 161. Table 121 describes most fields. The first three fields are required, and the
Dell PowerConnect W AirWave 7.1 | User Guide