Dell PowerConnect W-Airwave User Manual page 113

Table 71 Groups > PTMP/WiMAX Fields and Default Values
Setting
802.11g Radio Channel
Channel Bandwidth
Network Name
Network Secret
4. To configure packet identification rules, click the Configure packet identification rules link on the Groups >
PTMP/Wimax configuration page and define the settings as required. Packet identification rules are used to
define which packets match a subscriber station class.
the settings and default values.
Figure 62 Groups > PTMP/WiMAX Configuring Packet Identification Rules Page Illustration
Table 72 PTMP/WiMAX Configuring Packet Identification Rules Fields and Default Values
Setting
Name
Use IP TOS
Minimum TOS Value
(positive integer)
Maximum TOS Value
(positive integer)
Dell PowerConnect W AirWave 7.1 | User Guide
Default
10
20
Wireless Network
None
Default Description
None Text field defines a name for the PIR. The name should be meaningful and
descriptive. The name is used to define the subscriber station class.
No Identifies packets based on IP Type-of-Service for the PIR.
0 Specifies the minimum TOS used to identify packets.
0 Specifies the maximum TOS used to identify packets
Description
Selects the channel used for 802.11g radios by the devices in this
group.
Defines the channel bandwidth used by the devices in this group.
Sets the Network name, with a range of length supported from
two to 32 alphanumeric characters.
Sets a shared password to authenticate clients to the network.
Figure 62 illustrates this page and
Configuring and Using Device Groups in AWMS |
Table 72 describes
113