Supporting Users On Thin Ap Networks With The Users > Tags Page - Dell PowerConnect W-Airwave User Manual

Figure 161 Users > Guest Users > Add New Guest User Page Illustration
To make the Username or Password anonymous and to increase security, complete these fields then click
Generate. The anonymous and secure Username and Password appear in the respective fields.
6. Click Add to complete the new guest user, or click Cancel to back out of new user creation. The Users >
Guest Users page appears and displays results, as applicable.
Supporting Users on Thin AP Networks With the Users > Tags Page
Radio Frequency Identification (RFID) is an industry-standard method that supports identifying and tracking
wireless devices with radio waves. RFID uses radio wave tags for these and additional functions. Active tags have
a battery and transmit signals autonomously, and passive tags have no battery. RFID tags often support
additional and proprietary innovations that improve network integration, battery life, and other functions.
The Users > Tags page displays a list of wireless tags, such as Aeroscout, PanGo and Newbury, that are heard by
thin APs, and reported back to a controller that AWMS monitors. AWMS displays the information it receives
from the controller in a table on this page.
information displayed.
Figure 162 Users > Tags Page Illustration
Table 122 Users > Tags Fields
Field
Name
MAC Address
Vendor
Battery Level
Dell PowerConnect W AirWave 7.1 | User Guide
Figure 162
Description
Displays the user-editable name associated with the tag.
Displays the MAC address of the AP that reported the tag.
Displays the vendor of the tag (Aeroscout, PanGo and Newbury)—display all or filter by type.
Displays battery information—filterable in drop-down menu at the top of the column; is not displayed for
Aeroscout tags.
illustrates this page, and Table 122
Performing Daily Administration in AWMS |
describes fields and
233