Customizing Columns In Lists - Dell PowerConnect W-Airwave User Manual

Customizing Columns in Lists

You can determine which columns are displayed in any AWMS table by selecting or deselecting its checkbox
from the dropdown list made visible by clicking Choose Columns as shown in Figure 6. Using the up/down
arrows to the right of each column title, you can change the order in which the column heads appear with the
upper most column in the dropdown list correlating to the left most column in the table. As shown in Figure 6,
Username if it remains checked will appear as the left most column, Role will appear to the right of that, and so
on.
Figure 6 Choose Columns Dropdown List
For more information on the universal list elements, see "Common List Settings" on page 26.
You can also control which column heads appear for each user role by selecting the Yes radio button in the
Customize Header Columns field, as also appears in This exposes the Choose Columns for Roles
Figure 5.
dropdown menu in all tables shown in Figure 7. The right hand column shows the user roles already customized,
if any, for your particular production environment. The left hand column allows you to establish left to right
columns and order them using the up and down arrows alongside the column head entries. The column heads
and user roles displayed are set to their defaults, but can always be customized further, as needed.
Figure 7 Table With Choose Columns for Roles Menu Selected
Dell PowerConnect W AirWave 7.1 | User Guide Configuring AWMS | 33