Loading Firmware Files To Awms - Dell PowerConnect W-Airwave User Manual

Table 27 Device Setup > Upload Files Fields and Default Values (Continued)
Setting
Firmware MD5
Checksum
Firmware File Size
HTML Filename
HTML Version
HTML MD5
Checksum
HTML File Size
Desired Firmware
File for Specified
Groups

Loading Firmware Files to AWMS

Perform the following steps to load a device firmware file onto AWMS.
1. Browse to the Device Setup > Upload Files page.
2. From the Upload Files page, click the Add button. The Add Firmware File dialog box appears.
illustrates this page.
Figure 27 Device Setup > Upload Files > Add New Firmware Page Illustration
3. Click the Supported Firmware Versions and Features link to view a list of supported firmware versions.
Note: Unsupported and untested firmware may cause device mismatches and other problems. Please contact Dell support before
installing non-certified firmware.
4. Enter the appropriate information and click the Add button. The file uploads to AWMS and once complete,
this file appears on the Device Setup > Upload Files page. This file also appears on additional pages that
display firmware files (such as the Group > Firmware page and on individual AP/Device > Manage pages).
5. You can also import a CSV list of groups and their external TFTP firmware servers.
Table 28
Dell PowerConnect W AirWave 7.1 | User Guide
Default Description
None Displays the MD5 checksum of the file after it was uploaded to AWMS. The MD5 checksum
is used to verify that the file was uploaded to AWMS without issue. The checksum should
match the checksum of the file before it was uploaded.
None Displays the size of the firmware file in bytes.
None Supporting HTML, displays the name of the file that was uploaded to AWMS and to be
transferred to an AP when the file is used in an upgrade.
None Supporting HTML, displays the version of HTML used for file transfer.
None Supporting HTML, displays the MD5 checksum of the file after it was uploaded to AWMS.
The MD5 checksum is used to verify that the file was uploaded to AWMS without issue.
The checksum should match the checksum of the file before it was uploaded.
None Supporting HTML, displays the size of the file in bytes.
None The firmware file is set as the desired firmware version on the Groups > Firmware Files
page of the specified groups. You cannot delete a firmware file that is set as the desired
firmware version for a group.
itemizes the settings of this page.
Figure 27
Configuring AWMS | 59