Speed Issues Related To Cisco Ios Firmware Upgrades; Awms Firmware Upgrade Process - Dell PowerConnect W-Airwave User Manual

no ip route-cache
%enabled%
ssid OpenSSID
dfs band 3 block
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
channel %channel%
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
%endif%
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
%if ip=dhcp%
ip address dhcp client-id FastEthernet0
%endif%
%if ip=static%
ip address %ip_address% %netmask%
%endif%
no ip route-cache
%if ip=static%
ip default-gateway %gateway%
%endif%
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
access-list 111 permit tcp any any neq telnet
snmp-server view iso iso included
snmp-server community public view iso RW
control-plane
bridge 1 route ip
line con 0
line vty 0 4
login local
end

Speed Issues Related to Cisco IOS Firmware Upgrades

AWMS provides a very robust method of upgrading firmware on access points. To ensure that firmware is
upgraded correctly AWMS adds a few additional steps which are not included in vendor-supplied management
software.

AWMS Firmware Upgrade Process

1. AWMS reads the firmware version on the AP to ensure the firmware to which the AP is upgrading is greater
than the actual firmware version currently running on the AP.
2. AWMS configures the AP to initiate the firmware download from AWMS
312 | Access Point Notes Dell PowerConnect W AirWave 7.1 | User Guide