Dell PowerConnect W-Airwave User Manual page 51

Figure 23 AMP Setup > Roles > Add/Edit Role Page Illustration
3. Enter or edit the settings on this page.
As explained earlier in this section, Roles define the type of user-level access, the user-level privileges, and the
view available to the user for device groups and devices in AWMS.
values of this section.
Table 19 AMP Setup > Roles > Add/Edit Roles Fields and Default Values
Setting
Name
Enabled
Type
Dell PowerConnect W AirWave 7.1 | User Guide
Table 18
Default Description
None Sets the administrator-definable string that names the role. Aruba recommends that the
role name give an indication of the devices and groups that are viewable, as well as the
privileges granted to that role.
Yes Disables or enables the role. Disabling a role prevents all users of that role from logging
in to AWMS.
AP/Device Defines the type of role. AWMS supports the following role types:
Manager
AMP Administrator—The AWMS Administrator has full access to AWMS and all of

the devices. The administrator can view and edit all settings and all APs in AWMS.
Only the AWMS Administrator can create new Users or access the AMP Setup
page.
AP/Device Manager—AP/Device Managers have access to a limited number of

devices and groups based on the Top folder and varying levels of control based on
the Access Level.
Aruba Management Client—Defines the AWMS user. The user information defined

in AMC must match the user with the Aruba Management Client type.
Guest Access Sponsor—Limited-functionality role to allow helpdesk or reception

desk staff to grant wireless access to temporary personnel. This role only has
access to the defined top folder of APs.
describes these settings in additional detail.
Table 19 describes the settings and default
Configuring AWMS | 51