Using The Pci Compliance Report - Dell PowerConnect W-Airwave User Manual

Figure 195 Reports > Generated > New Users Report Illustration
Table 141 Reports > Generated > New Users Report Fields
Field
Username
Role
MAC Address
Vendor
AP/Device
Association Time
Duration

Using the PCI Compliance Report

AWMS supports PCI requirements in accordance with the Payment Card Industry (PCI) Data Security Standard
(DSS). The PCI Compliance Report displays current PCI configurations and status as enabled on the network.
In addition to citing simple pass or fail status with regard to each PCI requirement, AWMS introduces very
detailed diagnostic information to recommend the specific action or actions required to achieve Pass status, when
sufficient information is available.
Refer to the
network. The configurations in that section enable or disable the contents of the PCI Compliance Report that is
viewable on the Reports > Generated page.
Perform these steps to view the most recent version of the PCI Compliance Report.
1. Verify that AWMS is enabled to monitor compliance with PCI requirements, as described in the
Disabling PCI Auditing" on
2. Navigate to the Reports > Generated page.
3. Scroll to the bottom, and click PCI Compliance to display
Figure 196
Dell PowerConnect W AirWave 7.1 | User Guide
Description
Displays the username when known.
Displays the role with which the user is associated.
Displays the MAC address of the AP device by which the user connected.
Displays vendor information for the AP device by which the user connected.
Displays the device type by which the user connected.
Displays the time in which the AP device associated with the controller.
Displays the duration of the user's connection.
"Auditing PCI Compliance on the Network" on page 74
page 76.
illustrates the fields and information in the most recent PCI Compliance Report.
for information about enabling PCI on the
information.
Detail
Creating, Running, and Emailing Reports |
"Enabling or
281