Integrating AWMS with an Existing Network Management Solution
(NMS)
This is an optional configuration. The AMP Setup > NMS configuration page allows AWMS to integrate with
other Network Management Solution (NMS) consoles. This configuration enables advanced and interoperable
functionality as follows:
AWMS can forward WLAN-related SNMP traps to the NMS, or AWMS can send SNMPv1 or SNMPv2 traps
to the NMS.
AWMS can be used in conjunction with Hewlett-Packard's ProCurve Manager.
The necessary files for either type of NMS interoperability are downloaded from the AMP Setup > NMS page
as follows. For additional information, contact Dell support.
Perform these steps to configure NMS support in AWMS:
1. Navigate to the AMP Setup > NMS page, illustrated in
Figure 36 AMP Setup > NMS Integration Page Illustration
2. Click Add to integrate a new NMS server, or click the pencil icon to edit an existing NMS server. Provide the
information described in
Figure 37 AMP Setup > NMS Integration Add/Edit Page Illustration
Dell PowerConnect W AirWave 7.1 | User Guide
Table
35:
Figure
36.
Configuring AWMS |
73