What Next - Dell PowerConnect W-Airwave User Manual

4. Click Add to finish creating the new ACS server, or click Save to finish editing an existing ACS server.
5. The ACS server must have logging enabled for passed authentications. To configure your ACS server to log
the required information, you must enable the Log to CSV Passed Authentications report option, as follows:
Log in to the ACS server, select System Configuration, then in the Select frame, click the Logging link.

Under Enable Logging, click the CSV Passed Authentications link. The default logging options function

and support AWMS. These include the two columns AWMS requires: User-Name and Caller-ID.

What Next?

Navigate to additional tabs in the AMP Setup section to continue additional setup configurations.

Complete the required configurations in this chapter prior to proceeding to ensuing chapters of this document.

Dell support remains available to you for any phase of AWMS installation.
72 | Configuring AWMS Dell PowerConnect W AirWave 7.1 | User Guide