Configuring Radio Settings For Device Groups - Dell PowerConnect W-Airwave User Manual

Configuring Radio Settings for Device Groups

The Groups > Radio configuration page allows you to specify detailed RF-related settings for devices in a
particular group.
NOTE: If you have existing deployed devices, you may want to use the current RF settings on those devices as a guide for
configuring the settings in your default Group.
Perform the following steps to define RF-related radio settings for groups.
1. Go to the Groups > List page and select the group for which to define radio settings by selecting the group
name. Alternatively, select Add from the Groups > List page to create a new group, define a group name. In
either case, the Monitor page appears.
2. Go to the Groups > Radio page.
Figure 42 Groups > Radio Page Illustration
Dell PowerConnect W AirWave 7.2 | User Guide
Figure 42 illustrates this page.
Configuring and Using Device Groups in AWMS | 87