Configuring Radio Utilization Triggers; Viewing Radio Utilization Alerts; View Utilization And Rf Health Reports - Dell PowerConnect W-Airwave Manual

Figure 17 Channel Utilization in VisualRF (Interference)

Configuring Radio Utilization Triggers

1. Navigate to System > Triggers and select Add.
2. Select Radio Utilization from the Type drop-down menu as seen on Figure 18:
Figure 18 Radio Utilization Trigger
3. Enter the duration evaluation period.
4. Select Add New Trigger Condition.
5. Create a trigger condition for Radio Type and select the frequency to evaluate.
6. Select total, receive, transmit, or interference trigger condition.
7. Set up any restrictions or notifications (refer to the Dell PowerConnect W AirWave 7.2 User Guide in Home >
Documentation for more details)
8. When finished, select Add.

Viewing Radio Utilization Alerts

1. Navigate to APs/Devices > Monitoring or System > Alerts.
2. Sort the Trigger Type column and find Radio Utilization alerts.

View Utilization and RF Health Reports

1. Navigate to Reports > Generated.
2. Find and select a Device Summary or RF Health report.
Figure 19 Channel Utilization in an RF Health Report
Dell PowerConnect W AirWave 7.2 | Best Practices Guide Dell-Specific Capabilities in AWMS | 31