Table of Contents
Advertisement
Chapter 2
Installing the Base Station
Figure 11: Ground Cable Assembly
1. Ground Stud 2. Flatwasher 3. External Tooth Lockwasher 4. 10 AWG Isolated Ring 5. Nut 6. 10 AWG Ground Wire
2.
Using a 6 mm (1/4 in) square drive socket, torque the nut to 8.5 N·m (75 lbf-in).
Section 2.9
Connecting Power and Data
This section describes how to supply power to the base station and connect it to the network.
The RUGGEDCOM WIN7018 can be ordered with one of the following power connection options:
• PEC
• SFA
• SFD
CAUTION!
Crushing hazard – risk of damage to cables. Route all power supply cables so that people cannot walk
on them or place objects on or against them.
CONTENTS
•
Section 2.9.1, "Connecting a PEC Type Base Station"
•
Section 2.9.2, "Connecting an SFA Type Base Station"
18
1
2
3
4
3
Connecting Power and Data
RUGGEDCOM WIN7018
Installation Guide
2
5
Advertisement
Table of Contents
