Conformity With European Directives; Improper Device Modifications - Siemens SITRANS TS100 Compact Operating Instructions

Safety notes

2.2 Improper device modifications

In critical applications, a thermowell stress calculation is recommended:
● ASME PTC 19.3-TW2016
● Dittrich/Klotter-method engineering service
2.1.2

Conformity with European directives

The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic compatibil-
ity EMC
2014/30/EU
Atmosphère explosible
ATEX
2014/34/EU
The applicable directives can be found in the EC conformity declaration of the specific
device.
See also
Certificates (Page 107)
2.2 Improper device modifications
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
12
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
Directive of the European Parliament and of the Council on the
approximation of the laws of the Member States relating to elec-
tromagnetic compatibility and repealing Directive 89/336/EEC.
Directive of the European Parliament and the Council on the
approximation of the laws of the Member States concerning
equipment and protective systems intended for use in potential-
ly explosive atmospheres.
TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Compact Operating Instructions, 01/2018, A5E03920348-AE