Delete Config - Barco ImagePRO-II User Manual

4. Menu Orientation
Configuring Inputs
4.
5.
6.
aÉäÉíáåÖ=~å=fåéìí=`çåÑáÖìê~íáçå
From the Input Menu, select Delete Config to delete a configuration file that you
previously saved.
The following illustration shows the Delete Config Submenu.

DELETE CONFIG

> File1
Delete Config
Figure 4-20. Delete Config Submenu

To delete a user-defined input configuration, use the following procedure:
1.
2.
3.
4.
5.
6.
48
Use the ADJUST knob to scroll through the list to the file you wish to recall.
The Recall Config Submenu displays only configurations
Note
that match the current input format and type.
Press SEL to select the file.
Scroll down to Recall Config and press SEL again.
This function deletes a user-defined configuration file from the
Note
system. After you delete a configuration file, any inputs using
that configuration are restored to their default formats.
From the Input Menu, select Delete Config.
With the navigation cursor pointing to the input file name, press SEL. The
navigation cursor changes to the edit cursor and a list of files appears.
Scroll through the list to the file you wish to delete.
Press SEL to select the file.
Scroll down to Delete Config and press SEL again. A message appears, asking
you to confirm the deletion.
Press SEL to delete the configuration, or ESC to return to the Delete Config
Submenu.
ImagePRO-II • User's Guide