Barco ImagePRO-II User Manual page 147

Table A-1. ImagePRO-II Input Specifications
Input
Input 3
Input 4
Input 5
dÉåäçÅâ=péÉÅáÑáÅ~íáçåë
The following table lists the Genlock input specifications.
Table A-2. Genlock Input Specification
Input
Genlock
ImagePRO-II • User's Guide
Detail
Connector HDMI (Type A)
Formats RGB and YCbCr at 4:4:4, YCbCr at 4:4:2, per HDMI
1.4 specification
Deep color at 8/10/12 bits
Resolutions up to 2048x1080p @ 60 Hz
EDID support EDID 1.3 compatible
HDCP hardware HDCP 1.4 compatible
support
Connector DisplayPort
Formats Resolutions up to 2560x1600 @ 60 Hz (30 bits), per
DisplayPort 1.1a Specification
EDID and HDCP EDID 1.3 compatible & HDCP 1.4 compatible
hardware support
Connector SD/HD/3G SDI on BNC connector
Formats SD-SDI per SMPTE 259M-C (NTSC/PAL resolution)
HD-SDI per SMPTE 292M, 296M
3G-SDI per SMPTE 425
Loop-through Re-clocked loop-through output
Detail
Connector BNC connector
Formats NTSC/PAL blackburst
HD with tri-level sync
SMPTE bi-level sync
Loop-through Passive loop-through
^K==péÉÅáÑáÅ~íáçåë
Input Specifications
Specification
Specification
133