Barco ImagePRO-II User Manual page 136

5. Web Remote Control Operations
Configuring Outputs with the Web App Interface
^ÇàìëíáåÖ=lìíéìí=`çäçê=_~ä~åÅÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=
fåíÉêÑ~ÅÉ
The Color Balance page lets you adjust RGB contrast and brightness values separately,
and change hue and color saturation settings.
To access Color Balance from the Home page, select Setup > Output > Output Main >
Color Balance.
Figure 5-24. Output Color Balance Page
On this page:
•
•
•
pÉííáåÖ=~å=^êÉ~=çÑ=fåíÉêÉëí=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The output Area of Interest (AOI) is the portion of the display that your video occupies.
The default AOI exactly overlaps the output active area, but you can position the video
anywhere in that active area. As you do so, you change the size of the image without
affecting aspect ratio.
For details about positioning the image in the Area of Interest, and to see examples, refer
to
Setting the Area of Interest
From the Home page, click Output > Area of Interest. The Area of Interest page
appears, as shown in the following illustration.
122
The RGB Contrast and Brightness settings are adjustable within a range of 0%
to 200%. The default setting for all of these properties is 100%.
Hue is adjustable within a range of -180 to +180 degrees. The default setting is 0
degrees.
Saturation is adjustable within a range of 0% to 200%. The default setting is 0%.
in Chapter 4, on page 52.
ImagePRO-II • User's Guide