Barco ImagePRO-II User Manual page 135

5. Web Remote Control Operations
^ÇàìëíáåÖ=lìíéìí=`çäçê=bÑÑÉÅíë=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
On the Color Effects page, you can change output color, brightness, gamma and
sharpness. You can also invert the color palette of an image, or set a color image to
monochrome.
To access Color Effects from the Home page, select Setup > Output > Output Main >
Color Effects.
Figure 5-23. Output Color Effects Page
On this page:
•
•
•
For information about the Monochrome and Invert functions, refer to
Output Color Palette with the Web App Interface
`Ü~åÖáåÖ=íÜÉ=lìíéìí=`çäçê=m~äÉííÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
On the Color Effects page, you can:
•
•
To see examples of these color effects, refer to
Chapter 4.
ImagePRO-II • User's Guide
The Contrast and Brightness settings are adjustable within a range of 0% to
200%. The default setting for both of these properties is 100%.
Gamma is adjustable within a range of 0.3 to 3.0. The default setting is 1.0.
The Sharpness option sets the sharpness or softness of the output image. The
range is from -10 (softest) to +10 (sharpest). The default value is 0.
Change a full-color image to a monochrome (grayscale) image. Monochrome is
either or Off. The default setting is Off.
On
Invert the colors in the image's color palette by 180 degrees. The default setting
for Invert is Off.
Configuring Outputs with the Web App Interface
on page 121.
Setting Output Effects
Changing the
on page 58 of
121